The fully functional adapter allows the connection of various common monopolar instruments with banana plugs to the monopolar outputs of ERBE ICC, Vio, and Karl Storz Autocon coagulators with button control on the instrument.
When connected correctly, the cut and coagulation buttons on the instrument handle will be active.
It can be used with many common surgical monopolar instruments.
The connectors on the wires allow the connection of a working instrument with a different pin arrangement for cutting and coagulation.
Connection (shown in one of the photos):
- Red wire, red connector - to the electrode at the end of the working tool handle.
- Black wire, black connector - to the coagulation button on the handle of the working tool.
- White wire, black connector - to the cutting button on the handle of the working tool.
WARNING: To prevent the adapter and/or the ESU from malfunctioning, do not connect the tool pin connected to the tool nozzle to any of the black connectors on the adapter. It should only be connected to the red connector on the adapter. If the tool has only 1 connector pin, connect it to the adapter's red connector.
If the working tool's handle is not equipped with buttons, it should only be connected to the adapter's red connector.
On some machines, in some cases, the cutting button on the handle of the work tool may not work when connected correctly. This is due to the wide variety of ERBE and Storz Autocon models and the options installed (or not) in them.
